Rockwell Automation Publication 1783-UM006A-EN-P - May 2014 461
Configuring QoS Chapter 16
Follow these steps to configure QoS on your access point.
1. From the top menu, click Services.
2. From the Services menu, click QoS.
3. Select <NEW> Create/Edit Policy field or select an existing policy.
4. Type a name for the QoS policy in the Policy Name entry field.
The name can contain up to 25 alphanumeric characters. Do not include
spaces in the policy name.
If the packets you need to prioritize contain IP precedence information in
the IP header TOS field, select an IP precedence classification from the IP
Precedence pull-down menu. Menu selections include these items:
• Routine (0)
• Priority (1)
• Immediate (2)
• Flash (3)
• Flash Override (4)
• Critic/CCP (5)
• Internet Control (6)
• Network Control (7)
To Next Page
Loading...