EasyManua.ls Logo

Allen + Roth 1102764 - User Manual

Allen + Roth 1102764
22 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
ATTACH YOUR RECEIPT HERE
Widespread Bath Faucet
Español p. 12
SG24100
ALLEN + ROTH and logo design are
trademarks or registered trademarks of LF, LLC.
All rights reserved.
Serial Number
Purchase Date
Thank you for purchasing this ALLEN + ROTH product.
Questions, problems or missing parts?
Before returning, contact us on:
866-439-9800, 8 a.m. - 8 p.m., EST, Monday - Sunday or ascs@lowes.com.
ITEM #702753 / 5287418
1102764 / 5287442 / 5693061
MODEL #67693W-6104 / 67693W-614408
67693W-617001 / 67693W-6101 / 67693W-619068

Other manuals for Allen + Roth 1102764

Preview: Installation Instructions
Installation Instructions20 pages

Questions and Answers

  • J
    Jack CortezAug 8, 2025
    Why is the water pressure low in my Allen + Roth 1102764?
    • K
      Kimberly ColemanAug 8, 2025
      If you're experiencing low water pressure with your Allen + Roth Plumbing Product, the issue might be a clogged connector underneath the deck or a clogged aerator. To resolve this, turn off the water supply and disconnect the connector/aerator. Unscrew the connector/aerator and clean it under running water. Screw the connector/aerator back on and test the water flow. If the water pressure remains low, consider replacing the connector/aerator.
  • W
    Willie HardingAug 12, 2025
    What to do if the aerator leaks in Allen + Roth Plumbing Product?
    • M
      Mr. Roy Morris MDAug 13, 2025
      If the aerator of your Allen + Roth Plumbing Product is leaking or the water flow is inconsistent, it could be due to a dirty or misfitted aerator, or a clogged cartridge. First, remove the aerator and check for any debris in the aerator screens. Also, remove the cartridge and check for debris. Finally, ensure the aerator is properly installed.
  • R
    Richard ZamoraAug 17, 2025
    How to fix leaks underneath the handle of Allen + Roth 1102764 Plumbing Product?
    • C
      Corey RobertsAug 17, 2025
      If you find leaks underneath the handle of your Allen + Roth Plumbing Product, it's likely that the bonnet nut has come loose, and the O-ring on the cartridge is either dirty or damaged. Try tightening the bonnet nut first. If the leak persists, clean or replace the O-ring.
  • D
    David JacksonAug 23, 2025
    What to do if the aerator leaks in my Allen + Roth Plumbing Product?
    • J
      Jacob DuranAug 23, 2025
      If the aerator of your Allen + Roth plumbing product leaks or has an inconsistent water flow, it could be due to a dirty or misfitted aerator, or a clogged cartridge. Try these steps: 1. Remove the aerator and check for debris in the aerator screens. 2. Remove the cartridge and check for debris. 3. Ensure the aerator is properly installed.
  • C
    Cindy RothAug 28, 2025
    How to fix leaks underneath the handle of my Allen + Roth 1102764?
    • J
      Jessica GibsonAug 28, 2025
      Leaks under the handle of your Allen + Roth plumbing product usually happen because the bonnet nut has come loose or the O-ring on the cartridge is dirty or damaged. You can fix this by tightening the bonnet nut and cleaning or replacing the O-ring.
  • S
    sherry58Sep 2, 2025
    Why is there no hot or cold water in my Allen + Roth Plumbing Product?
    • L
      Leah CarterSep 2, 2025
      If there's no hot or cold water coming from your Allen + Roth Plumbing Product, it might be because the water inlet hose was accidentally kinked during installation, which restricts water flow. To resolve this, reinstall the water inlet hose, ensuring it's not kinked.

Summary

Package Contents

Safety Information

Preparation

Assembly Instructions

Pop-Up Drain Instructions

Operation Instructions

Care and Maintenance

Troubleshooting

Warranty

Replacement Parts List

Allen + Roth 1102764 Specifications

General IconGeneral
BrandAllen + Roth
Model1102764
CategoryPlumbing Product
LanguageEnglish

Related product manuals