EasyManua.ls Logo

Allen + Roth 873X-732707 - User Manual

Allen + Roth 873X-732707
22 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
Questions, problems, missing parts? Before returning to your retailer, call our
customer service department at 1-866-439-9800, 8 a.m. - 8 p.m., EST, Monday - Sunday.
ATTACH YOUR RECEIPT HERE
Serial Number Purchase Date
_________________________
Tub & Shower Faucet
ITEM # 2517124
MODEL # 873X-732707
Español p. 12
VR20189
_________________________

Table of Contents

Questions and Answers

  • J
    Jesus DunlapAug 7, 2025
    How to fix a leak from under the handle of Allen + Roth 873X-732707?
    • A
      Ann GambleAug 7, 2025
      If you notice a leak from under the handle or from the spout when your Allen + Roth Plumbing Product faucet is off, there are a couple of potential causes. First, the bonnet nut might not be tight enough. To fix this, remove the handle and retighten the bonnet nut. If the leak persists, the cartridge may be damaged. In that case, contact customer service for a replacement cartridge and install it once you receive it.
  • E
    Emily BakerAug 15, 2025
    Why does my Allen + Roth 873X-732707 showerhead have reduced water flow?
    • T
      Todd ScottAug 15, 2025
      If your Allen + Roth Plumbing Product showerhead has reduced water flow, it might be due to a dirty showerhead. Try removing the showerhead and clearing any debris that may be clogged at the shower connection. If the issue continues after cleaning, contact customer service for a new showerhead and replace it when you receive it.
  • M
    Michael MorrisonAug 23, 2025
    What to do if Allen + Roth 873X-732707 Plumbing Product showerhead leaks at the connection?
    • B
      brianfisherAug 23, 2025
      If there is a leak from the showerhead and shower arm connection of your Allen + Roth Plumbing Product, it could be due to using thread sealant tape. Remove the showerhead, take off any thread sealant tape between the showerhead and shower arm, and then reattach the showerhead directly to the shower arm. The seal washer in the showerhead provides the necessary seal. If the seal washer is missing, contact customer service for a new showerhead and replace it after you receive it.
  • M
    Manuel HendersonAug 30, 2025
    Why does my Allen + Roth 873X-732707 tub spout have reduced water flow?
    • W
      wilkersonrubenAug 31, 2025
      If the tub spout of your Allen + Roth Plumbing Product has no or reduced water flow, the angle stops or stop valves may not be fully open. To resolve this, fully open the angle stops and stop valves by rotating them counterclockwise with a flathead screwdriver (not included) until they can't rotate any further. This position indicates that the valves are completely open.

Summary

Package Contents

Safety Information

Preparation

Assembly Instructions

Adjusting Temperature and Water Flow

Care and Maintenance

Troubleshooting

Warranty

Replacement Parts List

Allen + Roth 873X-732707 Specifications

General IconGeneral
Brandallen + roth
Model #873X-732707
FinishBrushed nickel
Product TypeBathroom Sink Faucet
Mounting TypeDeck mount
ADA CompliantYes
WaterSense CertifiedYes
Lifetime Limited WarrantyYes

Related product manuals