Why is my Allen + Roth FW6AC035CP leaking from under the handle?
If you notice a leak coming from under the handle of your Allen + Roth Plumbing Product, it could be due to a loose retainer nut. Try tightening the retainer nut to see if that resolves the issue. Alternatively, the O-ring on the cartridge might be dirty or damaged. In this case, you should clean or replace the O-ring.
What to do if Allen + Roth FW6AC035CP Plumbing Product aerator leaks or has inconsistent water flow?
If the aerator of your Allen + Roth Plumbing Product is leaking or the water flow is inconsistent, the aerator may be dirty or misfitted. Unscrew the aerator to inspect the rubber packing. If necessary, replace the aerator.
Follow installation instructions carefully; installer is responsible for proper installation.
Check all parts against the package contents list before assembly or installation.
Ensure replacement aerator or flow controller is WaterSense compliant for water conservation.
Clean periodically with a soft cloth. Avoid abrasive cleaners, steel wool, and harsh chemicals.
Addresses common problems like leaks or inconsistent water flow with possible causes and corrective actions.
Details the limited lifetime warranty, terms, exclusions, and how to obtain service.
General| Brand | Allen + Roth |
|---|---|
| Model | FW6AC035CP |
| Category | Plumbing Product |
| Language | English |
To Next Page