21
Lowes.com/allenandroth
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
The fan wobbles
excessively.
1. The set screw in the downrod
support is loose.
2. The set screw in the in
downrod/hanger ball assembly
is loose.
3. The screws securing the fan
blade holders to the motor hub
are loose.
4. The blade holders are not
seated properly.
5. The hanger bracket and/
or ceiling outlet box is not
securely fastened.
6. The fan blades are out of
balance.
1. Tighten the set screws securely in the
downrod support.
2. Tighten the set screw in the downrod/
hanger ball assembly.
3. Check to be sure the screws that
attach the fan blade holders to the
motor hub are tight.
4. Check to be sure the fan blade
holders seat fi rmly and uniformly to
the surface of the motor housing. If
holders are seated incorrectly, loosen
the screws and retighten.
5. Tighten the hanger bracket screws to
the outlet box, and secure the outlet
box.
6. Refer to Blade Balancing Instructions
on page 18.
There is not enough
air movement.
1. The downrod is too short. 1. If possible, consider using a longer
downrod (not included).
To Next Page
Loading...
