OPERATING INSTRUCTIONS
1. Restore electrical power to the outlet box by turning
the electricity on at the main fuse box.
16
Lowes.com/allenandroth
FINAL ASSEMBLY INSTRUCTIONS
8. Install bulb (L) into the socket.
CAUTION: Bulbs are pressurized and may shatter. DO
NOT TOUCH BULBS WITH BARE HANDS. Fingerprints
may result in shorter bulb life. Remove ¿ ngerprints with
alcohol prior to use. To reduce the risk of ¿ re, use 100-watt
max. type T4-minican JD E11 tungsten halogen bulbs.
Turn off the wall switch and allow the bulbs to cool for 10
minutes before relamping.
8
8
L
9. Securely attach the glass (I) by twisting clockwise onto
the socket plate assembly (H). Do not overtighten or
force the glass (I) in place.
9
I
H
1
ON
ON
ON
ON
ON
ON
ON
ON
WARNING
Do not operate this fan with a variable (Rheostat)
wall controller or dimmer switch. Doing so could
result in damage to the ceiling fan's remote
control unit.
To Next Page
Loading...
