15
Lowes.com/allenandroth
FINAL ASSEMBLY INSTRUCTIONS
5. Remove one of the three preassembled adapter plate
screws (LL) inside the adapter plate at the bottom
of the motor (A). Slightly loosen the remaining two
adapter plate screws (LL). Assemble the light plate
assembly (G) to the adapter plate using the two
keyslots in the light plate assembly (G). Replace the
third adapter plate screw (LL) and secure all three.
Hardware Used
LL
Adapter Plate
Screw
x 3
5
5
A
G
LL
6
H
A
7. Remove one of the three preassembled light plate
screws (MM) inside the light plate assembly (G).
Slightly loosen the remaining two light plate screws
(MM). Assemble the socket plate assembly (H) to the
light plate assembly (G) using the two keyslots in the
socket plate assembly (H). Replace the third light plate
screw (MM) and secure all three.
Hardware Used
MM
Light Plate Screw x 3
7
H
G
MM
6. Connect the black wire from the socket plate
assembly (H) to the black wire from the motor
assembly (A), and the white wire from the socket
plate assembly (H) to the white wire from the motor
assembly (A).
To Next Page
Loading...
