Allflex LPR - Recharging the Device Battery; Battery Recharging Procedures; Interpreting Charge Indicators

10
E
N
ENGLISH
How to recharge the battery
To charge the battery, simply plug the USB cable into
the USB connector and connect it to the wall mount
adapter
3
provided with the reader. It will take
approximately 3 hours to fully charge the battery pack.
Note 7 - The batteries can be charged with a
computer but the charge time will significantly
increase
Note 8 - The reader cannot read tags with
depleted batteries. The other functions are fully
active.
Note 9 - Use the adapter and the USB cable
provided with the reader to charge the
batteries.
3
Install first the plug onto the adapter before use
Charge indicator
Battery fully
charged
Slow charge
Fast charge
(#3 hours)
Charge fault
(Temperature
exceed limits)