Allflex LPR - Using the USB Interface; Installing LPR PC Software and Drivers; USB Connection and Data Transfer

8
E
N
ENGLISH
Using USB interface
The USB port allows the device to transmit and receive
data via a USB connection to your personal computer
1. Before plugging your reader to your computer, first
install the LPR PC Software available on your local
Allflex website. This will pre-install the LPR USB driver
on your computer necessary to connect your
reader through USB.
2. Remove the protective cap covering the USB port
and connect the reader to your computer using the
USB cable. Your computer will automatically find
and install the drivers for the reader.
3. Run LPR PC Software to configure your reader,
configure a Bluetooth connection or download its
memory.