Allflex NX Series Operational Manual
Page 7 of 14
2.0 PREPARATION FOR USE
When you have mounted your Allflex Reader, and you are ready to use it, please ensure the following steps
are closely followed:
When inserting or attaching a new electronic RFID device into or on an animal, keep all other electronic RFID
devices a minimum of 3 meters away from the Allflex Reader. This will ensure you only read the device you
are inserting or attaching.
Keep computers a minimum of 3 meters away from the Allflex Reader.
Securely fasten the computer lead into your scale indicator or computer – screw the connectors into place.
Some magnetic fields will affect reading, such as some computers, computer monitors, electric motors and
generators. This may affect your read range and therefore your reader is being interfered with.
3.0 CARE AND MAINTENANCE
Keep all spare electronic RFID devices away from the Reader.
Protect computer and power leads from animals if the system is left in the yards.
Treat the system with care; Allflex has built this system for the cattle yards, but it is an electronic unit and
must be treated accordingly.
Keep all reader connectors clean and screw covers on fittings when not in use.
MOST IMPORTANT: Allflex’ customers are our highest priority, and if you have any queries, please feel
most welcome to contact your Allflex distributor.
To Next Page
Loading...