Alliance Laundry Systems BWNBC2PP113TW01 - Control Identification; Select Cycle Pads

Control Identification
Select Cycle Pads
SELECT CYCLE pads are used to select the specific washer cy-
cle. These pads include NORMAL HOT, NORMAL WARM,
NORMAL COLD, PERM PRESS WARM and DELICATES
COLD. These pads allow the user to select a cycle other than the
default cycle (NORMAL COLD).
The SELECT CYCLE keypads are not active after the first fill
step of the cycle. The selected cycle is indicated by the light
(LED) on the pad. Pressing the flashing START pad will confirm
the selection and the cycle will begin.
When a card reader is used, pressing the START pad will start the
cycle and deduct the vend price from the card.
WASH
RINSE
SPIN
NORMAL
HOT
NORMAL
WARM
NORMAL
COLD
START
DELICATES
COLD
PERM
PRESS
WARM
TLW49R_SVG1
1
3
2
4
5
6
TLW50R_SVG1
1
3
2
4
5
6
1. LED Light
2. SELECT CYCLE pads
3. Four 7-Segment Digits
4. Display
5. LED Status Lights
6. START pad
Figure 1
Control Identification
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
9 Part No. 203677ENR3