EasyManua.ls Logo

Alliance Laundry Systems HY125_MICRO - User Manual

Alliance Laundry Systems HY125_MICRO
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Installation/Operation/Maintenance
www.alliancelaundry.com
Washer-Extractors
Cabinet Freestanding
Refer to Page 8 for Model Identification
Part No. D1590ENR2
December 2014
Original Instructions
Keep These Instructions for Future Reference.
(If this machine changes ownership, this manual must accompany machine.)

Table of Contents

Questions and Answers

  • M
    Melissa MorganAug 5, 2025
    What to do if the Alliance Laundry Systems Washer door won't open in an emergency?
    • T
      Tanya CampbellAug 5, 2025
      In an emergency, to unblock the door lock, first verify that all conditions are present to safely open the door. For 75/335, 90/400 and 125/520 models, insert a tool with a maximum diameter of 5.5 mm (.21 in.) into the finger protection hole in the door. For 180/800 and 275/1200 models, unscrew the bolt in the lock cover, then insert a screwdriver into the hole in the lock cover and push softly. This lifts the latch mechanism, unblocking the lock. Open the door only if all safety conditions are fulfilled.

Alliance Laundry Systems HY125_MICRO Specifications

General IconGeneral
CategoryWasher
BrandAlliance Laundry Systems
ModelHY125_MICRO
Phase3
Control TypeMicroprocessor
Water TemperatureHot, Warm, Cold
Door TypeHinged
ConstructionStainless Steel
Frequency60 Hz
Cycle OptionsMultiple

Related product manuals