Alliance Laundry Systems HY125_MICRO - Page 5

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
D1590ENR2
3
Driving Mechanism .............................................................................. 58
Inspection of Belt Tightness ............................................................ 58
Belt Replacement ............................................................................. 58
Pulley Alignment ............................................................................. 58
Steam Filters ......................................................................................... 59
Cleaning the Filter............................................................................ 59
Thrust of Door Seal .............................................................................. 59
Adjusting on the Side of the Door Handle....................................... 59
Spring Unit - Models 75/335, 90/400 and 125/520 .............................. 61
Spring Unit - Models 180/800, 230/1000 and 275/1200 ...................... 62
Replacement Washer Fuses .................................................................. 62
Fuse Values...................................................................................... 62
Earth Leakage Trips.............................................................................. 62
The Test Procedure .......................................................................... 62
Troubleshooting Aids ......................................................................... 63
Door Blocking ...................................................................................... 63
Description of Door Lock Function................................................. 63
Lock without Tensions before the Program Start ............................ 63
Main Switch and Emergency Stop Button are Switched On ........... 63
Current Failure During Operation.................................................... 63
Unblocking the Door Lock in Case of Emergency.......................... 63
Error Indication Shown on Display ...................................................... 64
Putting the Machine out of Service ................................................... 65
Disconnecting the Machine .................................................................. 65
Machine Disposal ................................................................................. 66
Possibility of the Machine Disposal by a Specialized Company..... 66
Possibility of the Machine Liquidation by Own Potential............... 66