Alliance Laundry Systems STENCFSP176TW01 User Manual

Programming
Frontload Washer
Refer to Page 12 for Model Identification
FLW1556C_SVG
Cycle
Wash
Temp
ULTRADELUXEREGULAR
DELICATESYNTHETICNORMAL
HOT
START
WARMCOLD
Original Instructions
Keep These Instructions for Future Reference.
CAUTION: Read the instructions before using the machine.
(If this machine changes ownership, this manual must accompany machine.)
Part No. 807870ENR3
June 2021

Alliance Laundry Systems STENCFSP176TW01 Specifications

General

Brand	Alliance Laundry Systems
Model	STENCFSP176TW01
Category	Washer
Capacity	17.6 lbs
Phase	1
Frequency	60 Hz
Energy Star Qualified	Yes
Type	Front Load
Width	26.875 inches
Height	38.5 inches

Summary

Washer Operation

Machine States and Modes

Describes states like Power Up, Ready, Vend, Start, and Door operation.

Special Features

Programming and Diagnostics

Control programming, audit retrieval, and diagnostic testing procedures.

Operational Features

Entering the Manual Mode

How to Enter Manual Mode

Step-by-step instructions for accessing the manual mode.

Manual Mode Navigation

Programming Control

What Can Be Programmed

Overview of programmable features like cycles, vend prices, and special vends.

Programmable Options Available

List of programmable options with display codes, descriptions, defaults, and ranges.

Error Codes

Coin, Fill, and Drain Error Settings

Configuration for coin, fill, and drain error detection and timing.

Payment System and Communication Errors

Codes related to payment systems and communication failures.

No Water Flow Error Settings

Configuration for no water flow errors and time limits.

Water Leak, Drain, and Speed Errors

Codes for water leaks, slow drains, and max speed failures.

Alarm and Security Errors

Codes for break-in alarms and shutdown conditions.

Collecting Audit Information

Audit Feature Entry Methods

Reading and Exiting Audit Data

Testing Machine and Electronic Control Functions

Entering and Exiting Test Mode

Procedures for accessing, starting, and exiting diagnostic tests.

Diagnostic Test Reference Chart

Diagnostic Test Descriptions

Control and Drive Board Tests

Door and Coin Input Tests

Connection and Pulse Input Tests

Factory Test

Entering and Exiting Factory Test

Procedures for entering and exiting the factory test mode.

Factory Test Quick Reference

Rapid Advance Feature

How to Enter Rapid Advance

Power Fail Recovery