Alliance Laundry Systems SWNBX2SP303NW22 User Manual

Troubleshooting
Commercial Topload Washers
Refer to Page 7 for Model Numbers
TLW12C_SVG
Original Instructions
Keep These Instructions for Future Reference.
CAUTION: Read the instructions before using the machine.
(If this machine changes ownership, this manual must accompany machine.)
www.alliancelaundry.com
Part No. 204591EN
August 2018

Alliance Laundry Systems SWNBX2SP303NW22 Specifications

General

Model Number	SWNBX2SP303NW22
Category	Washer
Brand	Alliance Laundry Systems
Frequency	60 Hz
Control Type	Microprocessor

Summary

Safety Information

General Troubleshooting

Factory Test Procedures

Troubleshooting Flowcharts

No Hot Water

No Cold Water

Pressure Sensor Error

Flowchart for diagnosing and resolving pressure sensor error codes.

Water Fill Does Not Stop At Proper Level

Flowchart for diagnosing overfilling or water fill issues.

Motor Does Not Run

Flowchart for diagnosing and resolving issues where the motor does not operate.

No Agitation

Flowchart for diagnosing and resolving issues with no agitation.

Constant Agitation

Washer Overheats

Flowchart for diagnosing overheating and thermal protector issues.

Slow Spin Or No Spin

Flowchart for diagnosing and resolving slow or no spin issues.

Washer Will Not Spin - Low Speed

Flowchart for diagnosing and resolving low-speed spin failures.

Washer Will Not Spin - High Speed

Flowchart for diagnosing and resolving high-speed spin failures.

Constant Spin

Washer Stops In Cycle

Flowchart for diagnosing intermittent stopping or quitting issues.

Washer Is Locked Up Or Binding

Flowchart for diagnosing and resolving mechanical binding issues.

Outer Tub Does Not Empty

Excessive Vibration

Water Leaking From Outer Tub

Troubleshooting Electronic Control

Error Codes

No Visible Display on Control

Coins Ignored When Entered

Washer Will Not Fill

Washer Over Fills

No Agitation - Low Speed

No Agitation - High Speed

No Water Flow

Adjustments

Motor Test Procedure