EasyManua.ls Logo

Alliance Laundry Systems UWN060T3V User Manual

Alliance Laundry Systems UWN060T3V
58 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
www.comlaundry.com
Troubleshooting
Part No. F8123401R2
March 2011
PHM1408C
Washer-Extractor
Pocket Hardmount
UniLinc Control
Refer to page 7 for Model Numbers
35 - 125 Models
PHM1409C
PHM1409C
150 Models
Question and Answer IconNeed help?

Do you have a question about the Alliance Laundry Systems UWN060T3V and is the answer not in the manual?

Alliance Laundry Systems UWN060T3V Specifications

General IconGeneral
BrandAlliance Laundry Systems
ModelUWN060T3V
CategoryWasher
LanguageEnglish

Summary

Section 1 - Safety Information

General Safety Precautions

General safety guidelines for operating and maintaining the washer-extractor.

Important Safety Instructions

Specific safety instructions to reduce risks of injury, fire, and electric shock during use.

Locating an Authorized Servicer

Guidance on finding qualified service technicians for appliance repair.

Section 2 - Introduction

Customer Service

Information on obtaining literature, replacement parts, and technical assistance.

Nameplate Location

Details on where to find model and serial numbers on the appliance.

Model Identification

Lists all applicable washer-extractor models covered by this manual.

Section 3 - UW Theory of Operation

Fill

Describes the process of water entering the machine and level detection.

Wash

Explains laundry tumbling in wash water and the motor drive system.

Extract

Details the high-speed extraction process for effective water removal.

Section 4 - Troubleshooting

1. NO VISIBLE DISPLAY

Addresses issues where the LCD screen does not show any display.

2. NO FILL ANALYSIS

Troubleshoots problems related to the machine not performing fill analysis.

4. DOOR ERRORS (Close Door/Lock Door)

Covers errors related to the door not closing or locking properly.

9. HEATING MALFUNCTION

Guides on diagnosing and resolving issues with the machine's heating system.

14. DRAIN ERROR

Provides solutions for errors occurring during the drain cycle.

15. LUBRICATE BEARINGS DISPLAY

Explains how to reset the bearing lubrication reminder message.

20. J-PLUG CONNECTIONS (Inside of Control Module)

Details the location and identification of J-plugs inside the control module.

Related product manuals