To Next PageTo Next Page
Need help?Do you have a question about the Alliance Laundry Systems UWN065T4V and is the answer not in the manual?
General| Brand | Alliance Laundry Systems |
|---|---|
| Model | UWN065T4V |
| Category | Washer |
| Language | English |
Explains the meaning of DANGER, WARNING, CAUTION, IMPORTANT, and NOTE symbols used in the manual.
Lists essential safety precautions for operating the washer to prevent injury, fire, or equipment damage.
Focuses on safe operating practices and daily checks for the user to ensure personal safety.
Highlights the importance of legible safety decals on the machine for hazard awareness.
Lists all applicable washer models covered by this manual for reference.
Outlines procedures for inspecting the machine upon delivery for shipping damage.
Details where to find and how to access machine identification information on the nameplate.
Provides contact information for ordering parts and seeking technical assistance.
Provides net weight, shipping weight, and volume details for the machines.
Details cylinder diameter, depth, volume, perforation size, and open area.
Outlines motor details and power specifications for the drive system.
Lists various cylinder speeds and corresponding G-force ratings for different cycles.
Details electrical power requirements, heating capacities, and noise levels.
Provides detailed measurements for various dimensions of the machine.
Illustrates the location of mounting bolt holes for different installation types.
Shows required clearances for side-by-side and back-to-back machine installations.
Covers requirements for new, existing, elevated, and isolated pad installations.
Details the construction process for machine foundation pads, including excavation and reinforcement.
Describes methods for securing the machine to the foundation using anchors and grout.
Presents static and dynamic load specifications for machine placement.
Details requirements for direct drain and drain trough systems, including venting.
Specifies water supply requirements, pressures, and hose connections.
Covers electrical connections, grounding, and power supply requirements.
Lists electrical ratings and wire sizing for Non-CE and CE models.
Details steam supply connection, pressure, and filter requirements for steam-heated models.
Explains connections for external chemical supply systems and wiring diagrams.
Describes how to connect external chemical supply systems via internal or external power.
Step-by-step guide for operating the washer using the UniLinc control system.
Explains the Shakeout agitation step programmed at the end of cycles.
Step-by-step guide for operating the washer using the M30 control system.
Covers initial checks for basket rotation and out-of-balance switch operation.
Daily checks including door interlock, hose connections, and chemical lines.
Cleaning AC drive filter, door gasket, and dispenser.
Weekly checks for leaks and drain system functionality.
Monthly lubrication, V-belt inspection, and alignment checks.
Quarterly checks for fasteners, shields, paint, and steam filters.
Guidelines for cleaning and maintaining stainless steel surfaces to prevent damage.
Information on the proper disposal of electrical and electronic equipment according to WEEE directive.
