Alliance Laundry Systems YTEE5ASP283CW01 - Pump or Drain Valve Does Not Operate

62 806221
Washer Control Troubleshooting
32. Pump or Drain Valve Does Not Operate
Is there
voltage*
across the
wht/blk and the white wire
going to the pump or
drain valve?
Is there
voltage*
across terminals
"H6-4" and "H6-2" on the
drive board?
If the pump or
drain valve does not
operate check for
blockage. Replace
if necessary.
Correct wiring
between control
and pump or
drain valve.
Replace drive
board.
(1)
(2)
No
Yes
No
Yes
FLW1803S
*Refer to machine serial plate for correct voltage.
NOTE: Check at beginning of spin/drain portion of cycle.