EasyManua.ls Logo

ALLIANCE HDEBXRGS173CW01 User Manual

ALLIANCE HDEBXRGS173CW01
71 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Troubleshooting
Commercial Dryers
Refer to Page 6 for Model Numbers
DRY726C_SVG
Original Instructions
Keep These Instructions for Futur
e Reference.
CAUTION: Read the instructions before using the machine.
(If this machine changes ownership, this manual must accompany machine.)
www.alliancelaundry.com
Part No. D515519R3
December 2018

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the ALLIANCE HDEBXRGS173CW01 and is the answer not in the manual?

ALLIANCE HDEBXRGS173CW01 Specifications

General IconGeneral
BrandALLIANCE
ModelHDEBXRGS173CW01
CategoryDryer
LanguageEnglish

Summary

Safety Information

Locating an Authorized Service Person

Guidance on finding qualified service personnel for dryer maintenance and repair.

Introduction

Customer Service

Contact information for obtaining literature, replacement parts, or technical assistance.

Serial Plate Location

Instructions for finding the serial plate containing model and serial numbers.

Model Identification

Lists the specific dryer models to which this manual applies.

How Your Dryer Works

Explains the operational process of the dryer, including airflow and heating.

Dryer Troubleshooting

Dryer Motor Does Not Run

Flowchart for diagnosing why the dryer motor fails to start or operate.

Dryer Stops in Cycle; Quits After the First Few Loads; Has a Burning Smell; Cycles on Motor Thermal Protector

Diagnosing issues causing the dryer to stop mid-cycle, smell burnt, or cycle the thermal protector.

Dryer Motor Runs but Cylinder Does Not Turn

Troubleshooting steps for a dryer where the motor runs but the drum remains stationary.

Dryer Heating Assembly Does Not Heat or Burner Does Not Ignite

Steps to diagnose and resolve issues where the dryer fails to heat or the burner does not ignite.

Clothes Do Not Dry in Dryer

Troubleshooting guide for dryers that are not effectively drying clothes.

Excessive Chattering or Vibrating Noise in Dryer

Identifies causes and solutions for unusual chattering or vibrating noises during dryer operation.

Electronic Control Troubleshooting

Error Codes

Lists and explains error codes displayed on electronic controls for diagnostics.

No Display

Troubleshooting steps for situations where the dryer's electronic display shows no output.

Motor Will Not Start

Diagnostic procedures when the dryer motor fails to initiate operation.

No Heat - Electric

Steps to troubleshoot and resolve the absence of heat in electric dryer models.

No Heat - Gas

Steps to troubleshoot and resolve the absence of heat in gas dryer models.

Coin Drop Troubleshooting

Non-Electronic Coin Drops

Troubleshooting specific issues related to coin acceptance in non-electronic coin drops.

Electronic Coin Drops

Procedures for diagnosing and resolving problems with electronic coin drop mechanisms.

Coin Drops with New-Style Spring

Instructions for servicing coin drops featuring the newer style tension spring mechanism.

Test Procedures

Drive Motor - Motor Switch

Detailed steps for testing the motor switch for proper operation and continuity.

Burner System Operation - Gas Models

Explanation of the gas burner system's components and operational sequence.

Igniter Check - Gas Models

Procedure for testing the igniter's resistance and functionality in gas models.

Thermal Fuse (Electric Models)

Steps to test the thermal fuse for continuity and proper operation in electric dryers.

Door Switch

Instructions for testing the continuity and functionality of the dryer's door switch.

Internal Wiring of Dryer Motor Switch

Adjustments

Leveling Legs

Guidance on properly leveling the dryer using its adjustable legs for stability.

Burner Flame (Gas Models)

Procedure for adjusting the gas burner flame for optimal performance and safety.

Cleaning Electronic Coin Drop

Recommended steps for cleaning the electronic coin drop mechanism to ensure proper function.

Coin Drops with New-Style Spring

Instructions for servicing coin drops featuring the newer style tension spring mechanism.

Related product manuals