Need help?Do you have a question about the ALLIANCE PT3JGASP403UG06 and is the answer not in the manual?
Details on the advanced programmable computer control and its functions.
Details on the pads used to select specific washer cycles and their functions.
Explanation of the function of various LEDs indicating cycle status and options.
Details the state of the control when ready for cycle selection and operation.
Details the state when the vend price is satisfied or the control is in OPL Mode.
Explains the sequence of events and LED indicators during a cycle.
Describes how to pause a running machine cycle and resume it later.
Allows programming of cycle information, vend pricing, and diagnostic tests via keypad.
Details the diagnostic tests available to run on the washer and control.
Step-by-step instructions for entering the manual mode for programming and testing.
Overview of the five groups within Manual Mode and how to navigate them.
Lists the types of information and features that can be programmed using the keypads.
A quick reference list of programmable options with display codes, descriptions, defaults, and ranges.
Sets the vend price for NORMAL 90 cycle, shown when NORMAL 90 is selected.
Procedure for entering cycle programming mode and selecting a cycle.
Allows owners to program fill steps of a cycle with various parameters.
Allows owners to program agitate steps of a cycle with various parameters.
Allows owners to program soak steps of a cycle with various parameters.
Allows owners to program parameters during cooldown steps of a cycle.
Allows owners to program drain steps of a cycle with various parameters.
Allows owners to program extract drain (spin) steps of a cycle.
Step-by-step instructions for entering manual reset mode to restore factory defaults.
Steps to enter testing feature by scrolling through programmable options.
Detailed descriptions of each diagnostic test available on the washer.
Information about entering and performing tests within the Factory Test mode.
List of possible error codes for electronic control and their cause/corrective actions.
To Next Page
General