ALLIANCE NF3JLBSP403UT01 User Manual

Programming
Frontload Washer
Refer to Page 10 for Model Identification
A
B C
FLW92R_SVG
Original Instructions
Keep These Instructions for Future Reference.
(If this machine changes ownership, this manual must accompany machine.)
Part No. 805405ENR5
June 2016

ALLIANCE NF3JLBSP403UT01 Specifications

General

Brand	ALLIANCE
Model	NF3JLBSP403UT01
Category	Washer
Language	English

Summary

Preliminary Information

About the Control

Explains the washer control's functions and importance of proper setup.

Power Failure Recovery

Details how the washer resumes operation after a power interruption.

Control Identification

Select Cycle Pads

Explains how to select specific washer cycles using the control panel pads.

Washer Operation

Special Features

Programming Control

Allows owners to program cycle information, vend pricing, and other features.

Testing Machine and Control Functions

Details diagnostic tests for various washer operations.

Entering the Manual Mode

How to Enter the Manual Mode

Provides steps to enter Manual Mode for programming and testing.

Programming Control

What Can Be Programmed

Lists features that can be programmed via keypads.

Programmable Options Available

Lists programming options, their displays, defaults, and value ranges.

How to Enter Cycle Programming Cy CLE-

How to Enter Cycle Programming Cy CLE-

Details entering cycle programming mode to set up custom cycles.

Power Fail Recovery

Power Fail Recovery

Features saving cycle status in memory during power failures.