Need help?Do you have a question about the Allied Telesis AT-GS910/8 and is the answer not in the manual?
General| Ports | 8 x 10/100/1000BASE-T |
|---|---|
| Switching Capacity | 16 Gbps |
| Forwarding Rate | 11.9 Mpps |
| MAC Address Table Size | 8K |
| Jumbo Frame Support | 9KB |
| Dimensions | 280 x 180 x 44 mm |
| Operating Temperature | 0 to 50 °C |
| Storage Temperature | -40°C to 70°C |
| Humidity | 10% to 90% non-condensing |
| Power Supply | 100-240V AC, 50/60Hz |
Details FCC rules for radiated energy and potential interference in commercial environments.
Details ICES-003 compliance for digital apparatus and conformity with Canadian standards.
Lists RFI Emissions standards like FCC Class A, CISPR 22 Class A, EN55022 Class A.
Describes the Loop Prevention feature, how it detects and blocks network loops.
Lists requirements for choosing a suitable installation site for the switch.
Details how to mount the switch on a wall and correct orientations.
Details how to mount the switch in a 19-inch equipment rack.
Explains the procedure to power on the switch and verify its status.
Provides steps to install a switch on a wall using the AT-BRKT-J23 kit.
Advises reviewing safety precautions before using the AT-RKMT-J08 rack mount kit.
Provides steps to install a switch in a 19-inch rack using the AT-RKMT-J08 kit.
Guides on checking the POWER LED status if the unit is not receiving power.
Guides on checking L/A LED status for port link and activity.
Details safety and electromagnetic certifications (EMI, Immunity, Electrical Safety).
To Next Page