Allied Telesis x510 Series Product Information

x510 Series | Stackable Gigabit Switches
Key Solutions
Peace of mind at the network edge
Allied Telesis x510 Series switches make the ideal choice at
the network edge where security, resiliency and exibility
are required. In the above diagram, security is enforced
using Network Access Control (NAC) combined with tri-
authentication to prevent unauthorized users and devices from
connecting to the network. Link aggregations are used to provide
both resiliency back to the core switches and an increase in
available bandwidth over a single link. Flexibility is ensured with
the range of interface types and PoE options available on the
x510 Series and the ability to stack the switches if required.
10 Gigabit link
1 Gigabit link
10/100 link
Link aggregation
Remote
VPN
Internet
Server
Farm
x510-GTX
Router
Network
Attached
Sorage
x908
x510-GTX
x510-GPX
x510-GPX
x510-GPX
SBx8112
x510 Series | 3

Allied Telesis x510 Series Specifications

General

Series	x510 Series
Category	Switch
Operating Temperature	0°C to 50°C (32°F to 122°F)
MAC Address Table Size	16K entries
VLANs	4094
Jumbo Frames	9KB
Power Supply	Internal power supply, 100-240V AC, 50/60Hz
Stacking	Up to 8 units
Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
Management	Web-based, CLI, SNMP
Security Features	Access Control Lists (ACLs), 802.1X authentication, port security
Weight	Varies by model
Ports	Varies by model (e.g., 24, 48)
Dimensions (W x D x H)	440 x 260 x 44 mm (x510-52GP), 440 x 260 x 44 mm (x510-28GP)