13
FPC cables and stress
Over-stressed FPC cables can damage the camera and other hardware. When
camera and embedded board are twisted against each other or pulled apart
from each other with too much force, the FPC cable is over-stressed. Spring
contacts of FPC connectors are worn out, which can cause short circuits. Read
the instructions in Connecting FPC cables on page 20 carefully, see the user
guide for more details.
No hot-plugging for MIPI CSI-2
Alvium CSI-2 cameras do not support hot-plugging. Hot-plugging can destroy
the camera and the connected hardware by high inrush current. Disconnect all
power supplies of your embedded system before connecting FPC cables.
Camera mounting
Housed cameras must be mounted using the mounting threads.
To Next Page
Loading...
