Need help?Do you have a question about the Allison Transmission T 375 and is the answer not in the manual?
General| Brand | Allison Transmission |
|---|---|
| Model | T 375 |
| Category | Controller |
| Language | English |
Explains the meaning and use of Warning, Caution, and Note headings.
Details essential safety procedures for vehicle operation and handling.
Provides crucial safety warnings and steps for starting the engine.
Details operational procedures and considerations for starting in cold weather.
Explains the conditions and actions related to high transmission fluid temperatures.
Details warnings and procedures related to the parking brake.
Outlines the correct methods for towing or pushing the vehicle.
Explains how to select the appropriate gear range for operation.
Explains how retarder capacity is reduced due to high temperatures.
Lists approved fluids and considerations for selection.
Explains how to check transmission fluid levels.
Provides step-by-step instructions for checking fluid level with a dipstick.
Details the procedure for checking fluid level in cold conditions.
Details the procedure for checking fluid level at operating temperature.
Explains how to check fluid level using electronic shift selectors.
Provides step-by-step instructions for electronic fluid level checks.
Provides guidelines for fluid and filter change intervals.
Details the steps for changing transmission fluid and filters.
Provides steps to enable or disable prognostics features.
Explains the OM feature for monitoring fluid life.
Explains the FM feature for monitoring filter life.
Explains the TM feature for monitoring clutch health.
Provides an overview of diagnostic features and DTCs.
Explains how the system responds to active Diagnostic Trouble Codes (DTCs).
Explains the function and interpretation of the Check Trans light.
Details how to use the shift selector to retrieve diagnostic information.
Explains how to read and clear DTCs using keypad selectors.
Details how to read DTCs when the prognostics package is enabled.
Details how to read DTCs when the prognostics package is disabled.
Explains how to clear Diagnostic Trouble Codes.
Explains how to read and clear DTCs using the bump-shift selector.
Details how to read DTCs with prognostics on using bump-shift.
Details how to read DTCs with prognostics off using bump-shift.
Explains how to clear DTCs using the bump-shift selector.
Provides a comprehensive list and descriptions of Diagnostic Trouble Codes.
Continues the list of Diagnostic Trouble Codes and their descriptions.
Explains what different selector display conditions mean for DTCs and inhibits.
Details the hardware components and compatibility of the TCM.
Details the various retarder apply systems and operator controls.
To Next Page