Allmand MAXI-LITE - Page 28

Not for
Reproduction
28
Fuel System Indirect injection
Starting Aid Glow plug
Engine Alternator 30 A
Automatic Low Oil
Pressure Shutdown
7 psi 48 kPa
Automatic High Water
Temperature Shutdown
234° F 112° C
Fuel North America - diesel fuels that meet ASTM
D975 for Ultra Low Sulfur Diesel (ULSD) are
required. ULSD has a maximum sulfur content
of 15 parts per million (PPM) or 15 mg/kg. Diesel
fuel may be No. 1-D or No. 2-D. Refer to Engine
Operator’s Manual for detailed information.
Engine Oil Refer to Engine Operator’s Manual for detailed
information.
Engine Oil Capacity -
with Filter
5.4 US qts 5,1 L
Coolant System
Capacity
5.0 US qts 4,7 L
Coolant Overflow
Reservoir Capacity
1.1 US qts 1,0 L
Service Interval - Fuel
Filter
400 hours
Service Interval - Oil
Change and Filter
1000 hours
CAT C1.1 ESI
Specification Imperial Metric
Model Cat C1.1
Type Water-cooled 3-cylinder diesel
Displacement 69 cu. in. 1131 cc
Aspiration Naturally aspirated
Emissions EPA Tier 4 Final / EU Stage IV
Power Output - Prime 13.8 Hp @1800 rpm 10,3 kWm@1800 rpm
Fuel System Indirect injection
Starting Aid Glow plug
Engine Alternator 40 A
Automatic Low Oil
Pressure Shutdown
10 psi 69 kPa
Automatic High Water
Temperature Shutdown
234° F 112° C
Fuel North America - diesel fuels that meet ASTM
D975 for Ultra Low Sulfur Diesel (ULSD) are
required. ULSD has a maximum sulfur content
of 15 parts per million (PPM) or 15 mg/kg. Diesel
fuel may be No. 1-D or No. 2-D. Refer to Engine
Operator’s Manual for detailed information.
Engine Oil Refer to Engine Operator’s Manual for detailed
information.
Engine Oil Capacity -
with Filter
4.3 US qts 4,0 L
Coolant System
Capacity
4.7 US qts 4,4 L
Coolant Overflow
Reservoir Capacity
1.1 US qts 1,0 L
Service Interval - Fuel
Filter
1000 hours
Service Interval - Oil
Change and Filter
1000 hours
CAT TURBO C1.5T
Specification Imperial Metric
Model Cat C1.5T
Type Water-cooled 3-cylinder diesel
Displacement 91 cu. in. 1491 cc
Aspiration Turbo-charged
Emissions EPA Tier 4 Final / EU Stage IV
Power Output - Prime 22.3 Hp @1800 rpm 16,6 kWm @1800 rpm
Fuel System Indirect injection
Starting Aid Glow plug
Engine Alternator 60 A
Automatic Low Oil
Pressure Shutdown
10 psi 69 kPa
Automatic High Water
Temperature Shutdown
234° F 112° C
Fuel North America - diesel fuels that meet ASTM
D975 for Ultra Low Sulfur Diesel (ULSD) are
required. ULSD has a maximum sulfur content
of 15 parts per million (PPM) or 15 mg/kg. Diesel
fuel may be No. 1-D or No. 2-D. Refer to Engine
Operator’s Manual for detailed information.
Engine Oil Refer to Engine Operator’s Manual for detailed
information.
Engine Oil Capacity -
with Filter
7.5 US qts 7,0 L
Coolant System
Capacity
6.5 US qts 6,1 L
Coolant Overflow
Reservoir Capacity
1.1 US qts 1,0 L
Service Interval - Fuel
Filter
500 hours
Service Interval - Oil
Change and Filter
500 hours
Isuzu 4LE2T
Specification Imperial Metric
Model Isuzu 4LE2T
Type Water-cooled 4-cylinder diesel
Displacement 133 cu. in. 2179 cc
Aspiration Turbo-charged
Emissions EPA Tier 4 Final / EU Stage IV
Power Output - Prime 40.2 Hp @1800 rpm 30,0 kWm @1800 rpm
Fuel System Direct injection
Starting Aid Glow plug
Engine Alternator 50 A
Automatic Low Oil
Pressure Shutdown
10 psi 69 kPa
Automatic High Water
Temperature Shutdown
234° F 112° C
Fuel North America - diesel fuels that meet ASTM
D975 for Ultra Low Sulfur Diesel (ULSD) are
required. ULSD has a maximum sulfur content
of 15 parts per million (PPM) or 15 mg/kg. Diesel
fuel may be No. 1-D or No. 2-D. Refer to Engine
Operator’s Manual for detailed information.
Engine Oil Refer to Engine Operator’s Manual for detailed
information.
Engine Oil Capacity -
with Filter
11.5 US qts 10,9 L
Coolant System
Capacity
12.3 US qts 11,6 L