What to do if the lights are not operating on my Allmand Lighting Equipment?
If the Allmand Lighting Equipment lights are not working, start by checking the breakers in the outlet box to ensure they are turned on or have not tripped. Reset them if necessary. Also, make sure the lamps are screwed in tightly and are not burned out or broken; replace them if needed. Remove any excessive load from the auxiliary outlets.
Why are my Allmand Lighting Equipment lights not working?
If your Allmand Lighting Equipment lights aren't turning on, it might be because the connection between the light bar and fixture isn't secure. Check all connections and make sure they are properly fastened. Also, ensure you're using the correct replacement lamps. If the ballast temperature is below -29°C (-20°F), you'll need to warm the ballast.
Details hazards like unsafe operation, rollover, fire, burn, shock, and substance impairment.
Covers entanglement, flying objects, coolant hazards, and safety decals.
Highlights critical safety warnings for electrical, mechanical, and towing operations.
Covers engine exhaust risks and specific safety notes for non-US models.
Details tow vehicle requirements, hitch types, and connection procedures.
Detailed steps for safely raising and lowering the light tower mast.
Procedures for fueling the unit and starting/shutting down the engine.
General| Light Fixtures | 4 |
|---|---|
| Voltage | 120/240V |
| Hertz | 60 Hz |
| Number of Lights | 4 |
| Light Type | Metal Halide |
| Rated Output | 6 kW |
| Fuel Tank Capacity | 30 gallons |
| Generator Output | 6 kW |
To Next Page
