Allnet ALL0237R User Manual

ALL0237R
Wireless N 300Mbit
Access Point/Repeater
User´s Manual

Allnet ALL0237R Specifications

General

Standards	IEEE 802.11b/g/n
Frequency Band	2.4 GHz
Wireless Speed	Up to 300 Mbps
Security	WEP, WPA, WPA2, WPS
Operating Temperature	0°C to 40°C
Humidity	10% to 90% non-condensing
Antenna	2 x 5 dBi detachable
Operating Modes	Repeater

Summary

About the Device

Repeat and Extend WiFi Network

Explains the device's function as a repeater for extending Wi-Fi.

Make Wired Network WiFi Ready

Accessing the User Interface

Web Interface Access Instructions

Instructions on how to access the device's web-based user interface.

Setup Configuration

Mode of Operation Selection

Explains different operational modes like Repeater, Access Point, and Bridge.

Wireless Settings

SSID and Broadcast Settings

Wireless Security Modes Explained

Details various wireless security encryption types: WEP, WPA, WPA2, WPA/WPA2 PSK.

Wireless Basic Settings

Wireless Security Settings

MAC Filter Settings

MAC Filtering Policy Options

Managing MAC Addresses

LAN Configuration

Configuration Management

Backup Configuration

Update Configuration

Restore Factory Settings

How to reset the device to its factory default settings.

Firmware Upgrade

Updating the Firmware

Step-by-step guide to upload new firmware.

System Password Setup

Wireless Repeater Setup

Wireless Access Point Setup

Wireless Bridge Setup

WPS Configuration

Connect to Wireless Router via WPS

Steps to connect the device to a router using WPS.

Connect Wireless Client via WPS

Steps to connect wireless clients to the device using WPS.

Safety Precautions