Allstar 110927 User Manual

Your MVP Quik-Code Wireless Keyless Entry is designed to remotely operate
MVP garage door openers. The system permits the user to select one of 10,000
personal identification numbers (PIN’s) and operate multiple doors by using
different PIN’s. The radio frequency of the remote controls is fixed and tuned at
the factory; adjustments are not required and should not be attempted by the end
user.
by
Proper installation of your radio controls will assure years of
trouble-free operation
READ THE FOLLOWING INSTRUCTIONS THOROUGHLY
BEFORE STARTING INSTALLATION
Keep transmitters and remote controls out of the reach of children.
Do not let children play with or use the transmitter or remote controls.
Unexpected door operations can cause personal injury or property damage.
Do not place transmitter where the buttons can be accidentally or
unintentionally activated.
WARNING
Allstar MVP Quik-CodeTransmitters and Receivers are
compatible with HomeLink®.
HomeLink® is a registered trade mark of Johnson Controls.
Features of the Quik-Code Wireless Keyless Entry
On/Reset Key: This key turns on the keypad and light system allowing you to
operated the system as well as to see the keys in the dark. The keypad will
remain lit for 20 seconds after the last key is pressed.
Single Button Mode: Once you have entered a valid PIN and your door
operator begins to function, the number keys remain active for 20 seconds.
Pressing any one of these keys sends another signal to the operator and allows
you to stop and start the door operator.
Low Battery Indicator: The lighting for your keypad also serves as a low
battery indicator. When the keypad lights flash on and off the battery should be
replaced with a standard 9 volt battery.
Non-Volatile Memory: It is not necessary to reprogram the keypad after you
replace your battery.
GHI
*
PRS
7
4
1
0#
ON
RESET
DEF
6
MNO
9
WXY
3
8
TUV
ABC
5
JKL
2
MVP Quik-Code
Wireless Keyless Entry
Installation Instructions
Model 110927

Allstar 110927 Specifications

General

Brand	Allstar
Model	110927
Power	1/2 HP
Warranty	1 year
Type	Garage Door Opener
Safety Sensors	Included
Buttons	3

Summary

MVP Quik-Code Wireless Keyless Entry Installation Instructions

Introduction and General Warnings

Assures trouble-free operation with proper installation and provides general safety warnings.

Key Features Overview

Details the On/Reset key, Single Button Mode, Low Battery Indicator, and Non-Volatile Memory.

Mounting the Quik-Code Wireless Keyless Entry

Mounting Location and Procedure

Guides on selecting a convenient location and the physical mounting steps.

Mounting Height and Safety

Recommends mounting the keypad at least 5 feet high to keep it out of children's reach.

Installation Safety Warning

Emphasizes disconnecting power and ensuring the doorway is clear before testing.

Programming the Quik-Code Wireless Keyless Entry

PIN Selection Guidelines

Advice on choosing a secure, memorable four-digit PIN, avoiding obvious numbers.

Programming Safety Warning

Warns about unexpected door operations causing personal injury or property damage.

Programming Steps for Quik-Code Wireless Keyless Entry

Learn Mode Activation

Details on activating the receiver's learn mode using a paper clip and the wall station.

PIN Entry and Verification

Step-by-step guide for entering the PIN and verifying it with the keypad lighting.

Using the Keyless Entry

How to operate the door opener using the programmed PIN and stop/start functionality.

Changing the Keyless Entry PIN

Instructions on how to overwrite the existing PIN with a new one.

Erasing Memory and Re-learning

Explains how to erase all codes, including PINs and transmitters, and re-learn them.

Operational Check and Troubleshooting

Performing Operational Checks

Guides on testing the keypad operation by entering the PIN and verifying functionality.

Troubleshooting Tips

Provides common solutions for keypad activation issues, distance problems, and system malfunctions.

Operator Safety System Test

Recommends monthly testing of door operator safety systems to ensure proper adjustment.

Manufacturer's Limited Warranty

Warranty Coverage and Period

Details the one-year warranty for radio controls against defects in material and workmanship.

Obtaining Service and Returns

Outlines the authorization and procedure requirements for returning goods for warranty service.

Warranty Exclusions and Limitations

Specifies what is not covered by the warranty, including damage from misuse or improper installation.