Allstar SUPER BELT MVP-SB User Manual

INSTALLATION AND OWNER’S MANUAL
As of date of manufacture,
meets all ANSI/UL 325 Safety
Requirements for Vehicular
Garage Door Openers
Residential Vehicular Garage Door Opener
Model MVP-SB SUPER BELT
READ THIS MANUAL CAREFULLY BEFORE INSTALLATION OR USE
104334
INSTALLER: Place this manual in the plastic envelope provided and
permanently attach to the wall near the pushbutton.
Product Features ................................................... 2
Component Identification..................................... 3
Identify Your Door Type ........................................ 3
Important Installation Instructions........................ 4
Assembly Instructions........................................... 5
Installing the Opener ............................................. 7
Mounting the Front Bracket ................................ 7
Mounting the Power Head................................... 7
Power Requirements/Permanent Wiring ............ 8
Control and Auxiliary Equipment.......................... 9
Installation of the Super Station ......................... 9
Standard Wall Push Button Installation ............. 9
Installation of Safe Finish Photosystem........... 10
Important Safety Instructions ........................... 11
Installation Checklist ........................................... 12
TABLE OF CONTENTS
WARNING
Indicates a
MECHANICAL
hazard of INJURY
OR DEATH. Gives
instructions to avoid
the hazard
.
Operation and Adjustment Instructions..............12
Basic Operating Parameters..............................12
Door Arm Connection ........................................13
Programming The Radio System ......................14
FCC and IC Radio Operation Statement ..........15
Testing the Limit Settings..................................16
Testing the Sensitivity .......................................16
Testing the Reversing System ..........................16
Testing the Safe Finish Photosystem ...............17
Operating the Super Station..............................17
Wiring Diagram.....................................................18
Using the Manual Release Mechanism ...............19
Troubleshooting Guide ........................................19
Warranty Statement..............................................20
CAUTION
READ THESE STATEMENTS CAREFULLY AND FOLLOW THE INSTRUCTIONS CLOSELY
The Warning and Caution boxes throughout this manual are there to protect you and your equipment.
Pay close attention to these boxes as you follow the manual.
WARNING CAUTION
Indicates an ELECTRICAL
hazard of DAMAGE to the
door, door opener, or
equipment. Gives
instructions to avoid the
hazard
.
Indicates an
ELECTRICAL hazard
of INJURY OR
DEATH. Gives
instructions to avoid
the hazard
.
Indicates a MECHANICAL
hazard of DAMAGE to the
door, door opener, or
equipment. Gives
instructions to avoid the
hazard
.
By

Allstar SUPER BELT MVP-SB Specifications

General

Brand	Allstar
Model	SUPER BELT MVP-SB
Category	Garage Door Opener
Language	English

Summary

Product Features

Digital Radio Controls

Describes pre-programmed transmitter and re-programming capabilities.

Safe Finish™™ Photosystem

Invisible infrared beam that reverses door if beam is broken.

Super Station (Deluxe Wall Push Button)

Feature-packed accessory for full opener control and added functions.

Manual Release

Allows manual door operation via a pull cord during power failures.

Sensing System

Detects obstructions during door operation and reverses or stops the door.

Close Limit Switch

Overrides sensing system during final inch of closing to prevent reversal.

Optional Features: Keyless Entry System

Tamper-resistant keypad for garage entry without key or remote.

Important Installation Instructions

Assembly Instructions

Installing the Operator

Mounting the Front Bracket

Securing the front bracket to the header wall for proper opener alignment.

Mount Power Head to Ceiling

Instructions for securely attaching the power unit to ceiling joists.

Control and Auxiliary Equipment

Installation of Super Station or Standard Wall Push Button

Guides installation of wall-mounted controls for the garage door opener.

Installation of 2 Wire Safe Finish Photosystem

Details the mounting and wiring of the safety beam system.

Important Safety Instructions

Operation and Adjustment Instructions

Pre-Power On Installation Checklist

A list of checks to perform before powering on the opener.

Basic Operating Parameters

Explains how the opener responds to various button presses and states.

Door Arm Connection and Installation

Instructions for connecting the door arm to the trolley and the door bracket.

Remote Control Radio System

Information on the pre-coded transmitter and its compatibility.

Teaching the Operator the Transmitter Code

Process of programming the opener to recognize the transmitter code.

Testing the Limit Settings

Adjusting and verifying the door's full open and closed travel limits.

Adjusting the Sensitivity Force

Setting the force required to operate the door safely and reverse on obstruction.

Testing the Opener's Reversing System

Verifying the safety reversal feature by testing with a 1.5" obstruction.

Testing the Safe Finish™™ Photosystem

Checking the safety beam to ensure it stops and reverses the door.

Operating the Super Station Controls

Explains the functions of the buttons on the deluxe wall station.

Wiring Diagram

Visual representation of electrical connections for various components.

Wiring Auxiliary Equipment

Manual Release Operation

How to engage and disengage the manual release mechanism.

Troubleshooting Guide

A guide to diagnose and solve common problems using LED indicators.

Manufacturer's Limited Warranty