EasyManua.ls Logo

ALLTRONIC Micro7 - DIP Switch SW1 Configuration; DIP 1: Leaf Door Function; DIP 2: Anti-dragging Function; DIP 3: Pressed Button Function

Default Icon
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DIP FUNCTIONS (Dip Switch SW1)
DIP 1 : ON : LEAF DOOR FUNCTION ACTIVATED ( photocell stops movement in opening)
OFF: LEAF DOOR (P. L.) DISACTIVATED
DIP 2 : ON : ANTI-DRAGGING FUNCTION ACTIVATED (with low and/or hight photocell
obscured, the control does not grasp the opening order)
OFF : ANTI-DRAGGING DISACTIVATED
DIP 3 : ON : PRESSED BUTTON FUNCTION (look at the instructions next page)
OFF : PRESSED BUTTON DISACTIVATED : Automatic or Semiautomatic cycle
DIP 4 : ON : DYNAMIC FUNCTION ON BUTTOM : OPEN - BLOCK - CLOSE
OFF : DYNAMIC FUNCTION DISACTIVATED (Normal Cycle: Open - Close)
DIP 5 : ON : THE BLINKER BLINKS DURING ALL THE CYCLE
(il pulsante di blocco 5 e 6 di M1 - lo spegne)
OFF : THE BLINKER FIRST BLINK 4 SEC BEFORE CLOSING
(the button of block 5 and 6 of M1 - switches it off)
DIP 6 : ON : AUTO-TEST FUNCTION DW24B ACTIVATED
OFF : AUTO-TEST DW24B DISACTIVATED
DIP 7: ON : AUTO-TEST FUNCTION LOW PHOTOCELL ACTIVATED
OFF : AUTO-TEST LOW PHOTOCELL DISACTIVATED
DIP 8 : ON : AUTO-TEST FUNCTION HIGH PHOTOCELL ACTIVATED
OFF : AUTO-TEST HIGH PHOTOCELL DISACTIVATED
WARNING OF FAILURE AUTOTEST :
- If the low photocell does not work, the blinker advises with a blink of 2 seconds and the control
does not move.
- If the hight photocell does not work, the blinker advises with 2 blink of 2 seconds and the control
does not move.
- If the DW 24B does not work, the blinker advises with 3 blink of 2 seconds and the control
does not move.