Allworx
®
Verge™ IP Phone Series User Guide
Page 42 866.ALLWORX * +1 585 421 3850
www.allworx.com
Version: T Revised: February 14, 2019
To perform a call handoff:
1. Press the Handoff soft key.
• If there is only one possible destination device, the Allworx system automatically
transitions the call to the destination device.
• If multiple destination devices are available to receive the call handoff, use the up/down
navigation and Select button to select the receiving device and transition the call.
During a call handoff to another device:
• the previously used audio path on the destination device automatically becomes active.
• the Reach device switches to Remote Control Mode, if handing the call off to a Verge IP
phone. See
“Reach Remote Control” on page 68 for more information.
2. Listen for the tones to indicate:
• the call handoff from the current device was successful.
• the call handoff to the new device was successful.
• if the call handoff fails.
To Next Page
