ALP CL- 40M - 9. Specifications

52
CL-32S CL-32L CL-40S CL-40M CL-40L
Sterilization Dissolving/Warming
550×550×870 550×550×990 620×650×880 620×650×1000 620×650×1160
56kg 60kg 72kg 78kg 84kg
Body Gasket Stainless wire basket φ30×20cm×2pcs. φ30×30cm×2pcs. φ38×20cm×2pcs. φ38×30cm×2pcs. φ38×40cm×2pcs.
18A
Safety valve 0.29MPa 0.27MPa Standard accessories Others
Base plate
Chamber drain reciever
Exhaust bottle(3L)
Base plate
Chamber drain reciever
Exhaust bottle(3L)
Base plate hook
Controller
Microprocessor controller, graphic display
Temperature：3digits, PID control
Timer：2digits hours / 2digits minutes, down count
（Temperature/Time integration system）
Safety device
Double interlock system, Water lack preventive device,
Over temperature detector, Over pressure detector, Sensor break indicator,
Memory of power failure, Abnormal time indicator, Breaker, Safety valve
Hydrostatic test Conformity to the regulation of each country Body dimension W(mm)×D(mm)×H(mm） Weight Material
Chamber/Top plate /Base plate/Lid
SUS
Steel with melamine resin
Silicon rubber
Power source
AC220/230/240V, 1φ, 50/60Hz
12A
Chamber dimension I.D.(mm)×D(mm) Capacity
φ320×420
34ℓ
φ320×676
54ℓ
φ400×478
60ℓ
φ400×672
85ℓ
φ400×832
105ℓ
Operating temperature range
101 to 140℃ 101 to 137℃
Dissolving：40 to 100℃ Warming：40 to 60℃
Timer
Sterilization/Dissolving/Warming：0 to 48hours00minutes
Model Heating method Electrical heater in chamber Maximum operating pressure/temperature 0.27MPa/140℃ 0.25MPa/137℃
９．Specifications