Alpha-InnoTec SWP820 - User Manual

We reserve the right to make technical changes.
UK830509/200114 © Alpha-InnoTec GmbH
HEAT PUMPS
Operating Instr uctions
Professional
BRINE/WATER
UK
SWP – Series

Summary

Please read first

Symbols

Intended use

Safety

Operation

Device maintenance

Faults

Set-up and Installation

TRANSPORT TO THE INSTALLATION SITE

INSTALLATION

Assembly of the Hydraulic Connections

Electrical connection work

Rinsing, Filling and Ventilating the System

RINSING, FILLING AND BLEEDING THE HEAT SOURCE

Specific steps for preparing the heat source system, including using antifreeze.

Isolation of the Hydraulic Connections

RINSING, FILLING AND BLEEDING THE HEAT CIRCUIT

Details the process for rinsing, filling, and bleeding the heating circuit.

Installation of the control element

Domestic Hot Water Preparation

Domestic Hot Water Tank

Commissioning

Dimensional diagrams SWP 430 - SWP 820, SWP 410 H - SWP 500 H

Dimensional diagrams SWP 270 H and SWP 330 H

Dimensional diagrams SWP 1100 - SWP 1250, SWP 700 H - SWP 1000 H

Dimensional diagrams SWP 1600

Installation Plans

Installation plan 1;2 Size 1

Part one of the installation plan for Size 1 units, showing front and top views.

Installation plan 2;2 Size 1

Part two of the installation plan for Size 1 units, showing top view layout.

Installation plan 1;2 Size 2

Installation plan 2;2 Size 2

Terminal Diagram

Circuit Diagrams

Circuit Diagram 1;3 SWP 430 SWP 270 H

Circuit Diagram 1;3 SWP 540 SWP 820 SWP 330 H SWP 500 H

Circuit Diagram 2;3

Circuit Diagram 3;3

Circuit Diagram 1;3 Size 2

Circuit Diagram 2;3 Size 2

Circuit Diagram 3;3 Size 2

General checklist

Completion report for heat pump systems

Alpha-InnoTec SWP820 Specifications

General

Heating Capacity	8.2 kW
Energy Efficiency Class	A++
Heating capacity at B0/W35 according to EN 14511	8.2 kW
Operating Temperature Range Heating	-20°C to +35°C
Weight Outdoor Unit	85 kg
Power Supply	230 V, 50 Hz
Type	Air-to-Water Heat Pump