Need help?Do you have a question about the Alpha Power ETO 91B and is the answer not in the manual?
General| Frequency Range | 20Hz - 20kHz |
|---|---|
| Tube | 12AX7 |
| Signal to Noise Ratio | 90dB |
| Total Harmonic Distortion | <0.5% |
| Frequency Response | 20Hz - 20kHz (+/- 0.5dB) |
Instructions for installing the power transformer, including handling and securing the unit.
Details on connecting the amplifier to AC mains power, including voltage tap selection and grounding.
Explains the role of green and red GRID LEDs in indicating drive levels and potential overdrive.
Step-by-step instructions for adjusting the amplifier for optimal performance and output.
How the amplifier protects itself from high reflected power and VSWR conditions.
Diagnosing issues when the amplifier does not turn on or fails to indicate high voltage.
Troubleshooting problems related to power-on, time delay, and transmission.
Addressing issues with grid current indication and achieving rated RF output power.
Troubleshooting plate current indication in standby, distorted SSB signals, and TV interference.
To Next Page
