Need help?Do you have a question about the Alpha Technics 4600 Series and is the answer not in the manual?
Details the -40°C to +150°C range, accuracy, and probe compatibility.
Details the -20°C to +130°C range, accuracy, and functions.
Details the 8°C range, accuracy, and probe type.
Lists multi-channel data loggers, software, and various probes.
Provides definitions for accuracy, NIST, precision, repeatability, resolution, RS-232, sensor self-heating, etc.
Lists various probes for Model 4400-2 & 4600-2 Thermometers.
Lists probes compatible with Model 4400-1 & 4600-1 Thermometers.
Highlights key features like ultra-high accuracy, wide range, probe compatibility, and data interface.
Lists accessories like Thermal View Software, RS-232 Cable, Carrying Cases, Calibration Kit, Tripod, Power Cable.
Covers probe compatibility, RS-232 interface, user-friendly keypad, and large display.
Details battery access and proprietary low noise circuitry.
Instructions on how to power the unit on and off using the ON/OFF key.
Explains °C/°F symbols, temperature ranges, 'LO', 'HI', and battery status.
Explains HOLD, MIN/MAX, STORE, and DELTA T functions for temperature measurement.
Covers °C/°F selection, user calibration, and check calibration features.
Explains how to access and assign functions to MODE, F1, and F2 keys.
Details instrument accuracy versus temperature for the 4600-2 model.
Provides specs for thermistor, probe connection, range, resolution, repeatability, and system accuracy.
Explains assigning functions to F1/F2 keys using the MODE key.
Provides examples for assigning F/C and HOLD functions, and taking Delta T measurements.
Details instrument accuracy versus temperature for the 4600-1 and 4600S models.
Details specs for probe, connector, range, resolution, repeatability, and system accuracy.
Guides on assigning STORE (F1) and DELTA T (F2) functions and taking a Delta T reading.
Details how to perform and interpret a Delta T measurement using the F2 key.
Covers environmental conditions, reading rate, display, power, battery life, dimensions, and weight.
Outlines the 1-year limited warranty terms, exclusions, and service process.
Explains the automatic shutoff feature, its disabling, and configuration via Thermal View software.
Describes RS-232 data transfer, Thermal View software, and non-Thermal View data capture parameters.
Details procedures for in-warranty and out-of-warranty repair services.
Advises on annual recalibration, service contact, and shipping instructions.
Explains Thermal View's capabilities for data capture, presentation, and configuration.
Guides on replacing the 9 Volt alkaline battery.
Provides instructions for cleaning the unit, avoiding submergence, and cleaning probe contacts.
General| Accuracy | ±0.5°C (±0.9°F) from -20°C to 150°C (-4°F to 302°F), otherwise ±1°C (±1.8°F) |
|---|---|
| Display | LCD |
| Temperature Range | -50°C to 300°C |
| Resolution | 0.1°C |
| Measurement Range | -50°C to 300°C |
| Display Type | LCD |
To Next Page