010-619-J0 Rev B Page 23
Figure 15: Removing a CXRF or CXCM1 or CXCM1+
5.6 Removing the CXCM1 HP
To remove the CXCM1 HP:
1. Push up and hold the latch while removing the controller.
2. Pull from the location noted in the following image to remove the controller.
CAUTION: When removing the controller in a live system that has an LVD, ensure that the LVD override
jumper is set to correct position to avoid possible service disruption. Refer to the wiring and connections
section of the manual and the connection drawings
To Next Page
Loading...