ALPHA SPORTS 1-800-922-9024
13
Clamp the 1st left main
down at the throat and lock
the yellow swivel base.
Take the 1st right main and
load the string in the jaws of
the linear gripper. After loading
the string, pull it at an angle
to create resistance and to
prevent the string from slipping.
Grab the handle and rotate the
tension head away from the
racquet. Keep rotating until the
latch “pops” out and activates the brake. This will
keep the tension head in place and allow you
to release the string clamp so that it can be
repositioned.
STRINGING THE FRAME CONT’D.
To Next Page
Loading...
