ALPHA SPORTS 1-800-922-9024
15
To start the crosses, make
a starting knot if you are
using a two-piece method.
Weave the cross string by
running the string over-and-
under each main string. Be
careful not to misweave. If you
are using a one-piece string job you do not
need to make a starting knot. When pulling the
crossses across the mains make sure to slide the
crosses up and down the mains to disburse the
friction in order to prevent ‘notching’.
STRINGING THE FRAME CONT’D.
When the crosses are
completed, tie off and trim
the excess string. To release
the racquet, release the
pressure on the mounting
arms by loosening the
adjustment knobs counter
clockwise.
To Next Page
Loading...
