ALPHA SPORTS 1-800-922-9024
17
CALIBRATING THE MACHINE CONT’D.
Read the tension on the
calibrator to determine if the
tension is correct or not.
Loosen the
locking screw that
is located on the
side of the black
housing block.
Locate the tension adjustment screw
in front of the black housing block.
Turn the screw counter-clockwise to
make it string tighter, or clockwise to
make it string looser. IMPORTANT:
Release the tension on the
calibrator before making calibration
adjustments. Repeat the process
until the correct tension is pulled.
Lock the locking screw so that the
adjustment screw is secure.
To Next Page
Loading...
