ALPHA SPORTS 1-800-922-9024
9
Insert the angle frame
supports into the
appropriate slots located
on the end of the mounting
arms. The two slots are
designed to accommodate
most racquets.
Make adjustments by
turning the fine adjustment
knobs. The fit should be
snug.
Turn the mounting arm
adjustment knobs so that
the angled frame supports
fit up against the frame.
The fit should be snug,
but use caution. NOTE:
Over-tightening can cause
premature stress on the
frame.
MOUNTING THE FRAME CONT’D.
To Next Page
Loading...
