alphatronics UNii - User Management; Adding and Editing Users; User Settings Configuration

User manual UNii Rev.2.11 – 14-07-2022 10
EN
Users
In the user menu you can, if permitted, modify your own user settings, or create a new user (only possible for
supervisors). Depending on the UNii control panel model, the system has a maximum of 2,000 users. A code
consists of 6 digits, with which 999,999 different code combinations can be made. A code with only 000000 is
invalid.
In the usermenu the following main options are available:
- Change own data.
- Edit existing user.
- Add user.
Add user
Only possible for a user with administrator rights (Default this is User 1), this is normally only the supervisor of the
system. A new user code can be created with this option. You will be asked twice to enter the new (PIN) code.
After the (PIN) code has been created, the user settings can be changed via the "Change own data" or via the "Edit
existing user"
Edit existing user
Only possible for a user with administrator rights (Default this is User 1). If the 'Change existing user' is selected, a
list of users is shown in the display. Use the arrow up (key 2) and arrow down (key 8) to find the desired user and
press the  key or "Select" function key to view and / or modify the settings for this user.
If tags are used to arm and disarm the system, the user can also be searched in the system by presenting his /
her tag. Once the list of users is displayed press the "Search" function key and present the tag to the reader on the
keypad, the display will now jump to the user associated with this tag. Press the  key or "Select" function key to
view and / or modify the settings for this user.
The following user settings are present in the ‘Change own data’ of ‘Edit existing user’ menu’s:
Change name
Change the username. The username is displayed in the logbook and reported to a monitoring station.
Change code
Change the PIN-code you use to arm/disarm the system. The code cannot be changed to a code that already
exists or to a duress code. The code 000000 code is an invalid code.
Change code functionality
Changing the function of the (PIN) code. Options are:
• Code Direct arm and disarm
• Code to menu.
Code Direct arm and disarm ensures that all sections or groups linked to this user code are armed or disarmed
directly, Code to menu instructs the user to first select the section or groups and use the 'arm' or 'disarm' function
keys to arm or disarm the sections or groups.