User manual UNii Rev.2.11 – 14-07-2022 15
Definitions
Input: A sensor is connected to this (e.g. a motion detector or a door contact).
Section: A group of one or more inputs in a specific part of the building. Each section can be
armed or disarmed separately.
Group: A group of one or more sections.
Bypass: Temporarily deactivating an input.
Duress code: If configured by the installer it is possible to arm with the code +1, it seems that the
system works normally, but a separate message is sent to the monitoring station to
indicate that the action was taken under duress.
Magnetic contact: Sensor that is placed on a window or door.
(PIR) Detector: A "sensor" or "eye." A detector is a device designed to detect a certain phenomenon or
movement.
European norms and security classes
The UNII and its associated components meet the following European standards:
Security Grade: Grade 3 bij gebruik van draadloos Grade 2.
EMC : EN50130-4:2011 + A1:2014
Power supplies : EN50131-6:2017
Safety: EN IEC 62368-1:2014 + A11:2017
Beveiliging: EN50131-3:2009, EN50131-1:2006 + A1:2009 volgens Grade 3 and
environmental class II.
Radio : EN50131-5:2017 EN303 446 V1.1.0, EN301 489-1/52 EN55032
Alarm transmission: EN50131-10:2014, EN50136-2:2013
Certification body: Kiwa / Telefication BV, Nederland
EU Declaration of conformity: Alphatronics hereby declares that the radio equipment type UNii keypad KPR is
in conformity with Directive 2014/53 / EU.
The full text of the EU declaration of conformity is available at the following internet address:
www.alphatronics.nl/uniidoc
To Next Page
Loading...
