User manual UNii Rev.2.11 – 14-07-2022 11
Change language
When the user is logged in, the menus can be displayed in a different language than the standard system
language.
Change profile
With this option a user can be linked to a profile. Different profiles can be created for different groups or types of
users. A profile defines which section (s) may be armed and disarmed.
Add tag
With this function, the user's own tag can be enrolled or replaced. The change is established by presenting the
card in front of the built-in card reader of the keypad.
Remove tag
A programmed tag can be deleted with this option.
Advanced settings
Keypad settings
The settings below can be set individually for each keyboard and can only be set on the keyboard where the
menu is displayed.
LED brightness
The brightness of the key backlighting can be adjusted here (per keypad).
Display brightness
The brightness of the display can be adjusted here (per keypad).
Key volume
Here you can adjust the volume of the buzzer when a key is pressed (per keypad).
Buzzer volume
Here you can adjust the volume of the buzzer during entry and exit delays (per keypad).
Proximity sensor
Here the sensitivity of the proximity sensor can be set, if desired it can also be switched off, the display and
key illumination will only light up when a key is pressed.
Doorbell
For each input the option is available to program it as a doorbell function, the doorbell sound can be
switched on and off by the user on the keypad. If the doorbell function is switched on and an input is
disrupted when the system is disarmed, an output programmed as "doorbell" and / or the speaker output of
the system will briefly emit a sound. This function is very useful to indicate that a door is opened during the
day.
mySmartControl
With this option the system can be linked to the mySmartControl cloud service. For more information about
mySmartControl see chapter "General".
Ask your installer about the availability and possibilities of the (mobile) APP.
To Next Page
Loading...
