Alpine 3339 - Page 14

Female Vocalist
315Hz«63Hz—«12SHz «= 190H2 «= 250H7 «SOD? «= IKHz2.2KHr 4SKHz KHz = IBKH? GEE
[4] Radio Broadcast News
315HzG3Hr=—«125Hz = W902 «= 80H? «SOK: «= IKH? 2 2KH? 4 5KH? KHz IBKH? Me SKE
To use the Manufacture’s Equalization Presets follow the procedures below:
1. Select and play back your desired music category, male vocalist for example.
2. To activate the Manufacturer's Equalization mode, press and hold the P/M button ®
until the M indicator @ lights up.
3. Press preset number 2.
The preset number indicator @ will display “2.”
4. Now the male vocalist preset is activated and the equalization characteristics which
suit male vocals are shown in the display.
Fader Adjustment
This feature allows you to adjust the sound level between the front and rear speakers.
1. Press the FADER button @ to activate the fader control mode. The F indicator @ and
the display @ will blink.
2. Press the level control UP ® and DN @ buttons to adjust the front and rear output
levels. The UP and DN buttons work as follows.
When the UP button ® is pressed, the front level is emphasized (and the rear level is
attenuated). When the DN button © is pressed, the rear level is emphasized (and the front
level is attenuated)
MSH 63H =—-125Hz = 190K? = 250Hz = SOOH2 = KHz 2.2KH:« 4SKHr | SKH?—IBKH2 eee SEE eet
NOTE:
The fader control mode will be deactivated automatically if no adjustments are made for
5 seconds. Press the FADER button @ again to activate the fader control mode again.
Adjusting the Subwoofer Output
1.. Press the SUB W. button @ for more than 2 seconds to activate the subwoofer output
adjustment mode. The SUB W. indicator @ will blink.
14