Alpine 3339 - Page 16

1) Pattern "1" is a flat display.
2) Patterns “2” through “9” are graphic designs.
3) Pattern “10” is a battery status display.
4) Pattern “11” scans the patterns “2” through “9” for about 5 seconds each.
Display Examples
Pattern 2, Normal Mode (Positive)
315Hz 63Hz 125Hz = 190H2 = 250Hz §=—- S00Hr WHr = 22KHz4$KHz— SKH? TBKHz beer SFE meme
3iSH2 B3Hz = 125Hz— 19O0Hz «= 250Hz «= SODHz = KHz) 2. 2KHz 4 SKH2 = SKH? «= IBKHz teem SFE
8 10 R “ 16 /Nolt
315Hr = 63Hz = 25Hz = 90Hr «=. 280Hz «= SODHz = KHz 2.2KHz 45KHr SKK? 18KH2 eee SE
Pattern 6, Normal Mode (Negative)
315Hz = 63H2 125Hz «= 90Hz «= 250K: «= S00Hz =—IKHz «= 2. 2KHz 4 5KHz 0 SKHz TBKHz heme SF Emme
a 10 2 “ 16 /¥olt
31SH263Hz—125Hz = 190Hz «= 250Hz «= SO0Hz = IKHz «2 2KHr «4 5KKz KH: = ISKHz 0 bee SFE et
When
the
voltage
is
in
the
proper
range
(between
11
and
15
volts),
it
will
indicated
on
the
display
in orange.
16