41
English
Cassette Player
Operation
3
1
2
1
Playback
1
2
SOURCE
DEMO
When a tape cassette is inserted with the
movable display opened, the display closes
automatically and the playback starts.
When a cassette is already inserted, press the
SOURCE button to select the TAPE mode. The
mode will change each time the button is
pressed.
(*Only with a CD Shuttle connected.)
Press the
0
button to pause the tape
playback.
Press again to resume tape playback.
Pressing the O/C button stops the playback and
ejects the cassette. The movable display will
open automatically.
Notes:
• Make sure the cassette tape is fully inserted
into the mechanism before pressing the O/C
button to close the movable display.
• After a cassette tape is inserted, the tape
bias is automatically set. For high bias tapes
(metal, CrO
2
, etc.) MTL will be displayed.
O
/
C
OPEN
CLOSE
3
10
TUNER
CD SHUTTLE
TAPE
*
3D
TAPE
PAUSE
To Next Page
Loading...
