51
English
Equalizer/Surround
Operation
1
EQ
2
3
123456
123456
Memorizing the
Equalizer Settings
Press the EQ button to select the desired
equalizer setting (factory preset or your own)
you wish to store in memory.
Within 5 seconds after operating step , press
and hold any one of the Preset buttons (
1
–
6
) for at least 2 seconds. The indicators blink
for 5 seconds showing the unit is ready for
storing.
While the indicators are blinking, press the
Preset button (
1
–
6
) into which you wish
to store the selected equalization setting.
Repeat Steps to to store other settings.
The example shows the setting has been stored
at the Preset 2.
Note: You can store the BBE and Surround
settings as well as the Equalizer settings
in the Presets.
EQ SUR BBE
USER
PRESET
To Next Page
Loading...
