EasyManua.ls Logo

Alpine 3DA-W882E - CD Mode; Tape Mode

Alpine 3DA-W882E
67 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
62
English
CD Mode
In Case of Difficulty
Symptom
CD not functioning.
CD playback sound is wavering.
Unable to Fast-Forward or Backward.
Sound skips due to vibration.
Sound skips without vibration.
Output sounds dull.
Cause and Solution
Out of operating temperature range +50°C
(+120°F) for CD.
Allow the car's interior (or trunk) tempera-
ture to cool.
Moisture condensation in the CD Module.
Allow enough time for the condensation
to evaporate (about 1 hour).
The CD has been damaged.
Eject the CD and discard; using a
damaged CD in your unit can cause
damage to the transport.
Improper mounting.
Securely re-mount the unit.
Disc is very dirty.
Clean the disc.
Disc has scratches.
Change the disc.
Dirty or scratched disc.
Clean the disc: damaged discs should be
replaced.
Tape Mode
The tape head needs cleaning.
Clean the tape head.
Incorrect Dolby NR in use.
Check Dolby NR switch setting.

Related product manuals