Alpine 7516M - P.C. Board Removal Steps

7516M/7516MM
(7516L
3. Removal of Front P.C.Board
(1) After removal of Cassette Deck, remove two screws
marked “Z\" as shown in Figure 4.
(2) Disconnect the 20-pins connector from the Front P.C.Board..
* To make it easy, insert a thin stick object into an
aperture and push out the Front P.C.Board as
shown in Figure 5.
Then the Front P.C.Board will be removed with
Main P.C.Board.
a Front P.C.Board
Figure 4
4. Removal of Main P.C.Board QRB Connector
(1) After removal of Front P.C.Board, remove seven screws
marked “x” as shown in Figures 3 and 6.
(2) Disconnect all connectors from the Main P.C.Board.
Bottom Chassis Figure 6
Bottom Chassis
Front P.C.Board
Figure 5
~24~—